baby jumper shrinks into a shirt

I made this little jumper with pockets for Lila last fall.  This is one of those projects where you have a very clear picture of what you want the final result to be, and you know you're going to have to either wing it completely or alter an existing pattern to get what you want.  I knew I wanted a burgundy corduroy jumper to dress Lila in for Thanksgiving, but I wanted it have some cute girly accents so it wasn't so "heavy" on the eyes.  So I went trudging through the internet to find a pattern to alter.  

What I found to work with was this free pattern and tutorial from LiEr over at Ikat Bag (her version to the left).  Because I was born with no memory (probably not my only birth defect...) I totally lied to my friend Melissa and told her that I made this with no pattern.  Whoops.  Sorry LiEr!!  At the time all I could remember was making the pattern for the pockets, and making homemade bias tape for the trims, and deciding at the last minute to add the little ribbon bows.  And I knew I used some of Lila's existing clothing to set the length, and to modify the width.  So somehow that all just swirled around in my head until it solidified into the thought "I made this from scratch".  Well thank goodness I've since remembered.  Now you can head on over to Ikat Bag and grab the pattern for yourself!  

Here's a closeup.  My lovely vintage (we're talking avocado green) sewing machine decided to go into semi-retirement during this project, and quit sewing any stitch other than a straight.  As a result, I hand-stitched those buttons and buttonholes.  A labor of love, and a good reminder of how easy and quick it is to do on the machine.  (I've since purchased a new sewing machine, which is loooveleeey, but I do miss my old Kenmore).  

The fabrics are all from JoAnn's, and except for the corduroy they're leftover scraps from other projects, so I have no idea who made them, or whether they're still available.  At the time I sewed this I wasn't thinking about blogging, and as I've mentioned, I have no memory.  But you can probably still find the corduroy there.  

As you may have guessed from the title of this post, she outgrew this jumper in an instant.  It then became a shirt, as you can see above.  And if you look closely you can also see evidence she's a messy little eater.  This thing's been through the washer over and over again.  But now that the weather is approaching the 90's around here, she probably won't wear it again, unless it somehow still fits her this fall (which I doubt).  

The pattern comes in two sizes: 2T and 3-4T.  As she was less than six months old when I first made the jumper, I cut the size down considerably.  I also changed the angle at which the sides flare out, so that the jumper turned out narrower at the bottom than the original pattern, since that's the look I was going for.  

Can you see the way it fits rather straight and snug, as opposed to flaring out?  

One of the nice things about this pattern is that it's simple, and calls out to be embellished.  The pattern doesn't include a piece for the pockets, so I just drew up a size and shape I liked, and added bias tape to the top.  Hey, if you're looking for a tutorial on sewing with bias tape, I just happen to have one here (flashes big smile).  I also added the bias tape trim to the bottom hem for a more finished and matchy look.

I don't remember what type of seam the pattern called for, or if it did, but I went with flat-felled seams along the sides.  I'm liking the look, and I think I'll start using it more often, especially since it's not that hard to do.   Also, if you're like me and don't want to invest in a serger, it makes for a nice fray-less finish.  It's also flat on the inside unlike french seams, which stick out a little.  I don't know why, but I'm always thinking about whether the clothes I make Lila will scratch or annoy her when she wears them.  She could probably care less, but still, isn't that one of the points of handmade?  All the nice details.

I chose these matching buttons by default, since they were really the only pair I had that would work on this jumper.  But I'm glad I did, since I think brightly colored ones would detract somehow from the pockets and trims and make the finished product too busy.

Do you think I should be feeding her more?  Well, she did go and outgrow that jumper, so I guess we're okay. :)  

Best Wishes,


bias tape: a tutorial

Hi there!  You're here because you want to learn how to sew bias tape without making a giant mess of things.  And I'm here to show you how, using 4 simple steps and lots of photos so you don't get lost, and sharing all my little tips for success.  In this tutorial you'll learn how to enclose the raw edge of your project with bias tape, how to start and finish sewing your bias tape, and how to get it to go around curves smoothly, even hairpin curves.

I've noticed there aren't many tutorials out there for doing curves, so I'm focusing on that here, and not corners.  If you'd like to learn to sew bias tape around a corner, check out this tutorial from Maggie over at Smashed Peas and Carrots.  And, if you're feeling like going all out and want to make your own bias tape, you'll want to visit this tutorial from Dana at Made.  It's the absolute most thorough bias-tape making tutorial out there - she covers everything from what it is, to why it is, how to make it, how to use it, different types, oh my!  

When I first started sewing with bias tape, I wanted to do it Right.  I went looking all over the internet for the best method, and here's what I can tell you: there is no best method.  There's only what works best for you.  There are as many different ways to sew on bias tape as there are craft blogs on the internet.  So this is not the one and only way to do it, it's just the method I've worked out for myself over the years.  

Oh, by the way, I hate pins (because they hate me, which can be the only explanation for why they are always driving themselves up into my nail bed) so I avoid them whenever possible.  Sometimes I'll use those little flexible metal barrettes (you can get them from the jewelry section in JoAnn's) to secure layers together while sewing, but that's it.  So this is a pins-free bias tape tutorial.  Yay for that!  And, because I just happen to have magical color-changing bias tape, you'll see the tape in this tutorial change from red to pink and back again.  Certainly it's not because I didn't take enough photos the first time around, and had to take more of the next bib I sewed in order to make a complete tutorial.  

Here's a quick list of the 4 steps used in sewing on bias tape:  1) Orient your tape properly  2) Sew on  3) Trim and flip  4) Secure with final stitching

Before we get started, a note about bias tape - it's meant to be a little stretchy, so that you can tug and pull and get it to fit around curves.  That's the whole point.  It's what makes bias tape cool.  However, you don't want to start a tug-of-war with your machine.  Your machine will lose.  Or your project will.  So just be aware of the amount of force you're using, and relax a little if need be.  Once you've done this a time or two, it will become natural and you won't have to think about it anymore.  Another note - you'll want to use thread that matches the color of your bias tape as closely as possible.  Trust me on that one.

Okay, so here we have what's called double-fold bias tape.  Be careful to not accidentally buy single-fold bias tape - they look similar in their packaging at the store.  Mine is 1/2 inch, though you can find it or make it in other widths if you wish.  You'll want to pre-wash it if it's going onto something that will be laundered, like the baby bibs I'll be making in this tutorial.  And if you wash it be sure to iron it afterwards so that your creases are nice and crisp just like when they first came out of the packaging.  Now you're ready to go!

Step #1: Orient Properly

So looking closely at the photo above you'll see that one side is narrower than the other.  The narrower side is the top side, and the wider side is the bottom.  You want the bottom to be wider so you can be sure to catch it when you are sewing through from the top - this will make sense in a minute.

When you are first learning to work with bias tape it's helpful to get started by orienting it correctly onto your project, as you see in the photo above.  Start with your project face up.  See the narrower side of the bias tape laying over the top of the bib, and the wider underneath?  If you start this way, when you unfold it in the next step you can't go wrong.  (The terrycloth is the front of my project in all the photos below).  

So the next step is to place your finger onto the start of your bias tape, and then pull out the wider side from underneath your project.  

And then open up the bias tape the rest of the way, so that when you're done unfolding it, it's upside down. What was the outer side of the bias tape should be laying against the front of your project.  It should also be aligned against the edge of your project.  So, at this point you have your bias tape upside down with the narrow end against the edge of your project.

Okay, now flip over the end of your tape, about a 1/4 inch or so, as in the photo above.  And you're all ready to sew!  

Step #2:  Sew!

You want to sew right inside that first crease, starting from the beginning of your bias tape, as shown above. And just follow along that crease, using your fingers to adjust your bias tape, and keep it lined up on the edge of your project as you sew along.  See how I'm not using pins?  I'm a rule breaker.  And I find that using my hands to align the tape is easier and faster.  I've found that the end results look better too.  But if you and pins work well together, than by all means, do so.  Whatever works best for you.

Here you are, approaching your first curve and beginning to panic inside.  No need.  Just fold your bias tape along the inside edge so that you have a couple small creases, like you see above.  This will cause the outer edge of your bias tape to curve nicely along the outer edge of your project.  But, and this is important, DO NOT let those folds intrude past the first crease, the one you are sewing along.  Doing so will mean that you are sewing creases permanently into your project.  If it doesn't make sense now, it will later.  For now just do your best to not sew over any folds.  Readjust your bias tape once or twice as you are sewing along the curve if needed.

In the picture above, I'm sewing the tape around one of those hairpin bends in my baby bib.  And not only that, but there's a piece of velcro layered in there as well.  Here's how you can get decent results under these circumstances: Take Your Time.  Sew three stitches, leave your needle in the down position, lift presser foot, turn project slightly, adjust bias tape slightly, lower presser foot, sew another three stitches.  If you try to go too quickly, you will inevitably sew creases into your project.  This is because on a very tight curve you can't help but have those little folds protrude past your sewing line as you are adjusting your bias tape (see above).  As long as you go slowly, you should be able to keep the area just in front of your presser foot free of folds, as you see in the picture above.  And as long as you can do that, you should be okay.  

I find that around tight curves, it really is best to forgo pins.  You'll drive yourself nuts trying to get it all pinned down correctly, and the truth is that you need to be able to tug and pull and readjust here and there, and pins will get in your way.  As a final reminder, remember to keep the outer edge of your bias tape aligned with the outer edge of your project as best you can.  You probably won't be able to keep it perfect all the way around, but as long as the area just in front of your presser foot is correctly aligned, all will be well.  And here in a bit, I'll show you a couple of techniques for minimizing any errors you do make.  And you will make them (everyone does, even the best among us) so don't be hyper-critical of yourself.

Okay, I wanted to show a picture of what will happen when you sew around an inner curve, like along the neckline of a bib.  The project will want to rise up into the air on you.  Go ahead and let it.  It's the bias tape curling to meet the curve ahead, and it won't affect the look or flatness of the end result.

So you've made it around all those curves and you're nearing the starting point.  Leaving the needle and presser foot in the down position to secure your project, grab a pair of scissors and cut your bias tape to about a 1/4 to 1/2 inch past the original fold, as you see in the picture above.  You want to do this so that your layers are staggered, to help reduce bulk.  And then finish sewing down your bias tape to the end.  Backstitch to secure.

Step #3: Trim and Flip

Now flip around to the backside of your project.  See the back of my bib above?  See how the seam allowance ended up wider along one side?  We want to fix that. 

Measure out how wide you want your allowance to be (3/8 inch in my case), and trim to that width all the way around, being careful not to cut into the bias tape you've just sewn down.  What you are trying to do here is make sure that when you wrap your bias tape around to the back of your project, it won't end up wider in some areas and narrower in others.  If some parts of your bias tape are too narrow, you won't catch them when you do the final sewing.  If this isn't clear, hang on, it will be soon. 

Okay, now that your allowance is evenly trimmed all the way around, go ahead and flip your tape to the backside, so that it wraps around the raw edge of your project.  Above you can see me doing this at the start point of the tape, and you can see how the tape is staggered at the seam.  When you are done, you want to make sure that the raw edge of your bias tape on the backside is folded in.  In essence, it should look just like it did when you were orienting it properly in the beginning, only now you've sewn it down on the inside of the front.  

This is what the back may look like where your layers overlap.  We want to fix that.  Tuck those raw edges under if they are sticking up.  

Like so.  And now go ahead and bust out a barrette, or a pin if you wish, to keep this seam secure until the next step.  Or press it flat.  Or just hold it tight.  Whatever works for you.  (As a side note, there's a way to sew this seam so that it ends up at a 45 degree angle, rather than vertical like you see above.  The ladies at Prudent Baby will teach you how if you like.  I like the vertical seam just fine, so that's what I do).

Ready for the final step?

Step #4: Stitch to Secure

Starting at the seam you just flipped over (which you can't see because it's under my presser foot), stitch in the ditch all around your project, backstitching at the beginning and end to secure.  If you feel like it, and before you get started sewing, pin the bias tape all along the backside.  Otherwise, just use your hands to snug up the bias tape as you go along.  The point of all this snugging is to make sure you have a nice wide swath of bias tape on the backside to catch with your needle.  Take your time and snug often, since your stitching will show on the backside when you're done.

Stitching in the ditch, in case you don't know, means to sew right inside the groove, or ditch, where two fabrics meet, in this case terrycloth and bias tape.  Do you see where the needle is going in the picture above?  If you're unfamiliar with this, it may seem impossible to follow that line all around your project, but I assure you it can be done.  Take your time if you're feeling nervous.  

Remember from Step #1 how the back side of your bias tape is wider than the front side?  

That's so that you can catch it when you stitch in the ditch.  See?  Even though you stitched an invisible line on the front of your project, you still caught the bias tape on the back.   

And here's a view of the back of my bib.  Can you see that the stitching is not quite evenly spaced from the edge all the way around the entire bib?  That's perfectly acceptable to me.  The main thing is that the bias tape is lying flat all the way around, and I caught the tape when I stitched in the ditch.  

And here's the front.  Nice flat bias tape, smooth all the way around.

Wow.  You can't ask for more than that from bias tape.  That's a pretty sharp bend my friends, and the bias tape streched up to the job.  Te he.  Silly word play.  Oh how I do amuse myself.  Ahem.  Anyways, bringing the bib under the microscope you will see that when I stitched in the ditch I overshot slightly when coming around the curve, and so you can see a few of my stitches in the bias tape.  If that happens to you, don't worry, it really isn't going to be noticeable.  That's why we use matching thread people.

The other flap of my bib.  Not quite as flat as the first, but still pretty nice looking.  Perfectly acceptable I say.  

If you find that there are places along the back of your project where you didn't quite catch the bias tape (and it does happen), then go ahead and go back over that section again.  Be sure to snug the tape around the backside nice and tight, and then flip back to the front of your project.  Beginning before your missed section, stitch slightly into the bias tape, like you see above.  Continue slightly past the missed section to be sure it's good and secure.  Chances are no one will ever know.  Unless you tell them in your online tutorial.  

And that's it!  Now you have all the steps and tips you need to sew like a bias tape pro.  Although it might seem like a lot of work, it really isn't after you've done it once or twice.  You're going to love the look, and you'll find yourself making any excuse to add bias tape to a project.  

I really would love to hear if this helped you out.  If you have any questions about the tutorial, chances are others do too, so go ahead and ask right in the comments section.  I'd also love to hear if you have tips of your own that you'd like to share.  

Happy Sewing!


Chunky Monkey Baby Bib

Ta da!  Here it is, the Chunky Monkey Baby Bib!  If you read my last post, then you've been gleefully sitting on the edge of your chair, biting the tips of your curled fingers with anticipation, knowing this was coming.  Yes?  No?  I've been working on this for what seems like forever, because I kept getting interrupted.  In fact, I've been done with the bibs themselves for almost a week now, but just haven't found time to post about them.  I'm currently working on creating the instructions and pattern in PDF form to share with you.  No telling how long that'll take.  You might not want to wait on the edge of your seat for it, is what I'm saying.  (Update!  I've completed the free pattern and instructions - here's the post!)

So anyways, this bib was born out of necessity, as so many craft projects are.  I was very fortunate to have been given lots of bibs for Lila by my mom and friends, so I didn't have to think about them for the longest time.  But then, she started growing, as babies are wont to do, and she basically outgrew a lot of them.  Let me tell you, what you want in a bib is coverage, and if you don't have that, you're in trouble.  Especially if you dress your baby in pretty handmade dresses and shirts.  So it was time to either go buy some bigger bibs, or make some of my own.  As it happens, my awesome crafting friend out in California, Pele, sent me some sweet little bibs for Lila a few months ago (you can see them below), and that inspired me to hit the sewing machine and make some of my own.  

These babies have seen a lot of use.  
Here you can see the size difference.  Pele's bibs are a good size, I'd say a nice medium fit, not for newborns, not for two year-olds.  Do two-year-olds use bibs?  Funny that I don't know.  Anyways, I went BIG on these bibs, especially around the shoulders.  

And I'm completely crazy, so I took the time to applique designer fabrics on each one.  Yes.  A product whose sole function is to be spat up on.  A product that will be thrown in a crumpled heap into the dirty laundry pile, and washed in hot water repeatedly.  

And I even took the time to apply bias tape, even all the way around those hairpin curves.  But I do so very much like the look of these bibs.  By the way, the terry cloth fronts came from a hooded baby towel.  I was also given lots of those, and had like ten on hand.  Lila doesn't need ten towels.  I don't even need ten towels.  So a couple of the hand-me-down's from cousins have found a new life.  

It was a lot of fun to pick out the shapes and fabrics for the applique.  

You have your happy star, your green apple, your musical note, your hot air balloon, your teddy bear.  That teddy bear turned out electric.  He's like a disco teddy bear from the 70's or something.  He's clearly dancing, which is why he's at a funny angle.  It's not because I wasn't paying attention while appliqueing him, and he ended up tilted to one side.  No.  He's dancing.

And here are the back sides.  I just used whatever sturdy, somewhat coordinating fabric I could find in my stash.  I suppose these are reversible, so if one side gets all stained up you could then switch to using the other side.  

And here we see the bib in its native environment, under the head and around the shoulders of a human child.  

It looks good on you Lila.  Real good.
Notice the lovely shoulder coverage, and the elegant draping down the front.  

Mmmm, gobble gobble gobble.  Let the feeding frenzy begin...

Success!  Dirty bib, clean shirt.  Happy baby, happy mommy.  :)  

Best Wishes,


can you guess what i'm sewing from this pic?

Well you people are pretty smart, so you probably can.  It's going to be my next post.  Maybe my next two or three posts actually, since I'm thinking of including a bias tape tutorial.  There's always room on the internet for another tutorial, isn't there?  The internet's pretty roomy, I hear.  Anyways, here's a hint: the next project is related to this stuff:

In case you can't tell, that's baby food, of the homemade variety.  Score points for this tired mommy!  Now it's one of the laws of nature that Teresa Can't Cook.  I mean I can put together some spaghetti or a casserole, and I can whip up a yummy breakfast if I have the time and energy.  But I'm talking about real cooking, the kind my husband does.  The kind that requires intuition, patience, a true love of the ingredients that go into the final dish.  I have those qualities, but only for my daughter and my crafting.  Food is just annoying to me.  My stomach is annoying.  Always crying out for more.  It feels as though I spend half my life slumped against the open fridge or pantry door, looking at the shelves stuffed full of ingredients, and thinking "there's nothing to eat in this house".   Sigh.  And I never can seem to plan ahead for a meal, so suddenly, in the middle of something important, my stomach is screaming at me for food.  So annoying.  Are you like that?  Am I the only one?

Anyways, baby food.  So I can't cook, but I can operate a blender.  And steam veggies.  And that's all you need to do to make your own baby food.  Because I'm a bad mommy, I skipped doing this for the longest time and just fed her pre-packaged stuff, or sat for 20 mins chopping up into tiny tiny bits whatever I was eating that meal.  But eventually I realized that having a ton of food already on hand means at least I don't have to go through the slumping sighing routine with Lila's meals.  And let me tell you, that girl is what I call a "good communicator," which is my nice way of saying that she will shatter mirrors with her screaming if left sitting hungry in a highchair.  So voila!  A huge array of healthy wholesome food, ready to fill up her belly.  

I spent all day, from early morning to late at night, steaming and blending and mixing and freezing.  A whole day people.  Didn't stop to clean, to craft, to relax, didn't even get a shower.  And I used every available container around here.  Those heart shaped things are ice cube trays from Ikea.  And just look at that yummy grape, strawberry and plum mix.  Oh yeah, I break baby food rules left and right.  But she's allergic to dairy and soy, so the kid's gotta eat something.  Strawberries, oranges, chocolate, cinnamon, corn, pork, rye, tomatoes, egg whites, shellfish, mango, melon, wheat, she's had 'em all.  Bad mommy.  At least I haven't given her honey or peanuts yet.  

Mr. Sippy Cup is okay with my parenting.  Look at him, beaming smiles of approval at me.  And I filled him with an orange mango mix.  Lila loves it.  :)

Stay tuned to find out what I've been sewing, and for the free pattern and tutorial to follow!

Best Wishes,